Windows PE Installation Guide

Windows PE Installation Guide

The Windows PE (Windows Preinstallation Environment, WinPE for short) may be extremely useful when you need to reboot a computer and conduct troubleshooting and recovery chores. The compact version of Windows can be used to install a full version of Windows alongside the ability to troubleshoot and fix problems with an existing Windows installation. System administrators and IT professionals commonly utilize Windows PE as a tool for delivering and maintaining Windows-based systems.

Depending on your needs and the resources at your disposal, you may install Windows PE in a number of different methods. Some typical approaches are listed below:

1. Making a bootable USB drive: Using the Windows ADK (Assessment and Deployment Kit) and the MakeWinPEMedia utility, you can turn any USB flash drive into a bootable Windows PE drive. In this way, you may use the USB device to boot a machine into Windows PE.

2. PXE booting: a PXE (Pre-Boot Execution Environment) server may be set up with the Windows Deployment Services (WDS) to provide Windows PE network booting.

3. Using a CD or DVD: burning a Windows PE image on a CD or DVD and using it to start a machine is another option.

4. With third-party program: you may also use a third-party program, such as Rufus or the Windows USB/DVD Download Tool, to create a bootable USB drive.

Keep in mind that you'll need both a valid Windows license and a copy of the Windows PE image in order to install Windows PE.

If you want to be sure you're using Windows PE correctly, it's also a good idea to check the relevant Microsoft documentation.

Here we use the first method to install WinPE.

1. Download WINPE. Here is the download link:!Ap_DPeP7sjTyk0hx7xnxgzUxfZNu?e=d3HhEv

2. Prepare a USB flash disk and extract the downloaded WINPE to the root directory of the USB flash drive:

Windows PE Installation Guide-2
3.Power off the Lincplus laptop and connect the USB disk to the laptop. Power on the laptop and keep pressing FN+F7 until you see the boot menu. Choose the U disk by ↓↑and press “enter”.

Windows PE Installation Guide-3

4. Then you will enter the desk under WinPE.
Note: The touch pad will not work in this program, you need to connect a mouse. Click “my pc” and copy the important files to the USB flash.


Puede que te interese

How To Factory Reset Your Laptop & Tablet PC?

Dejar un comentario

Todos los comentarios se revisan antes de su publicación.

Este sitio está protegido por reCAPTCHA y se aplican la Política de privacidad de Google y los Términos del servicio.